New 834 Wheel Dozer For Sale in Georgia
Yancey Brands
Hotlines
834 Wheel Dozer
834 Wheel Dozer
834 Wheel Dozer
834 Wheel Dozer

Designed with performance in mind, the Cat® 834 Wheel Dozer delivers fast speeds for quick travel and cleanup on your jobsite. Improved efficiency and more productivity get the job done quickly and with less emissions. Simplified serviceability makes for a long lifecycle, low owning and operating costs, and more uptime.

Get Pricing
Call 877-OWNACAT
Engine
Engine Model Cat® C18 
Net Power - SAE J1349:2011 496 hp
Rated Speed 1900 r/min
Peak Power Speed 1500 r/min
Gross Power - SAE J1995:2014 562 hp
Bore 5.7 in
Stroke 7.2 in
Displacement 1105 in³
Peak Torque - 1,300 rpm 2092 lb/ft
Torque Rise 52 %
Note (1) Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator.
Note (2) The following engine configurations are available: – Meets U.S. EPA Tier 4 Final and EU Stage V emission standards. – Noncertified that emits equivalent to U.S. EPA Tier 3.
Operating Weight 105271 lb
Blade Capacities 7.9 – 22.2 m3 (10.3 – 29.0 yd3)
Transmission Type Cat planetary power shift
Forward - 1 4.2 mile/h
Forward - 2 7.2 mile/h
Forward - 3 12.6 mile/h
Forward - 4 22 mile/h
Reverse - 1 4.2 mile/h
Reverse - 2 7.6 mile/h
Reverse - 3 13.3 mile/h
Direct Drive - Forward 1 Lock-up disabled
Direct Drive - Forward 2 7.7 mile/h
Direct Drive - Forward 3 13.7 mile/h
Direct Drive - Forward 4 23.9 mile/h
Direct Drive - Reverse 1 4.5 mile/h
Direct Drive - Reverse 2 8.1 mile/h
Direct Drive - Reverse 3 14.3 mile/h
Note Travel speeds based on 35/65-R33 tire
Lift/Tilt System - Circuit Pilot operated LS valve with EH
Lift/Tilt System Variable displacement piston
Maximum Flow at 1,900 rpm 153 gal/min
Relief Valve Setting - Lift/Tilt 4641 psi
Cylinders, Double Acting - Lift, Bore and Stroke 139.75 mm × 1021 mm (5.5 in × 40.2 in)
Cylinders, Double Acting - Left and Right Tilt, Bore and Stroke 140 mm × 230 mm (5.5 in × 9.1 in)
Pilot System Variable displacement piston
Pilot Maximum Flow 13.7 gal/min
Pilot Relief Valve Setting 580 psi
Steering System - Circuit Pilot, load sensing
Steering System - Pump Piston, variable displacement
Maximum Flow 65.8 gal/min
Relief Valve Setting - Steering 3495 psi
Total Steering Angle 86 °
Steering Cycle Times - High Idle 3.1 s
Steering Cycle Times - Low Idle 5.7 s
Fuel Tank 209.5 gal (US)
Cooling System 31.7 gal (US)
Crankcase 15.9 gal (US)
Diesel Exhaust Fluid Tank 8.7 gal (US)
Transmission 31.7 gal (US)
Hydraulic System Factory Fill 63.4 gal (US)
Differential - Final Drives - Front 49.1 gal (US)
Differential - Final Drives - Rear 49.1 gal (US)
Hydraulic System - Tank Only 37 gal (US)
Note (1) All non-road Tier 4 Final/Stage V diesel engines are required to use: – ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer). ** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels. • For pre-Tier 4 engines: Cat engines are compatible with diesel fuel blended with the following lower-carbon intensity fuels** up to: • 100% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. * For use of blends higher than 20% biodiesel, consult your Cat dealer. ** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.
Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system contains 1.8 kg (3.9 lb) of refrigerant, which has a CO2 equivalent of 2.574 metric tonnes (2.837 tons).
Front Fixed
Rear Trunnion
Oscillation Angle ±13°
Brakes ISO 3450: 2011
Operator Sound Pressure Level (ISO 6396:2008) 72 dB(A)
Machine Sound Power Level (ISO 6395:2008) 113 dB(A)
Operator Sound Pressure Level (ISO 6396:2008)* 72 dB(A)
Machine Sound Power Level (ISO 6395:2008)** 109 dB(A)
Note (1) * For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives”
Note (2) ** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701
Note (3) The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (4) The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (5) Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Operator Sound Pressure Level (ISO 6396:2008) 72 dB(A)
Machine Sound Power Level (ISO 6395:2008) 113 dB(A)
Operator Sound Pressure Level (ISO 6396:2008)* 72 dB(A)
Machine Sound Power Level (ISO 6395:2008)** 110 dB(A)
Note (1) * For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives”
Note (2) ** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701
Note (3) The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (4) The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (5) Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Height - Top of Exhaust Stack 15.9 ft
Height - Top of Air Cleaner 12.8 ft
Height - Top of Hood 10.9 ft
Ground Clearance - Bumper 3.1 ft
Centerline of Rear Axle to Edge of Bumper 10.5 ft
Wheel Base 14.9 ft
Length - Front of Tire 28.4 ft
Length - Straight Blade on Ground 32.6 ft
Length - Universal Blade on Ground 34.4 ft
Centerline of Front Axle to Hitch 7.5 ft
Ground Clearance 1.7 ft
Height - Top of Cab 13.7 ft
BUILT TO PERFORM

        
  • The full box-section rear frame helps resist torsional shock and twisting forces.
    •     
  • Heavy-duty steering cylinder mounts efficiently transmit steering loads into the frame.
    •     
  • Optimized axle mounting helps result in increased structural integrity.
    •     
  • Achieve long component life with increased size of upper hitch pin, frame plate, and bearing.
    •     
  • Solid through-width push beams transfer and absorb stresses through a larger portion of the frame.
    •     
  • Features fully enclosed hydraulic wet disc brakes for improved performance.
    •     
  • Robust structures withstand the toughest conditions and multiple lifecycles to help improve your bottom line.
    •     
  • In corner dozing, stresses are transferred and absorbed through a larger portion of the frame.

        
  • The Cat C18 engine is designed for maximum fuel efficiency in the most demanding applications.
    •     
  • Experience reliable efficiency with complete control over injection timing, duration, and pressure with Mechanically Actuated Electronic Unit Injection (MEUI™).
    •     
  • World-class Cat planetary powershift transmission features consistent, smooth shifting and efficiency through integrated electronic controls.
    •     
  • Extended engine life and improved fuel efficiency with reduced rated speed.
    •     
  • Impeller Clutch Torque Converter (ICTC) and Rimpull Control System (RCS) provide precise rimpull control.
    •     
  • Load sensing hydraulic steering system enables precise machine control for easy loading.
    •     
  • Lock-up torque converter with advanced control of lock-up speed.
    •     
  • On demand cooling fan helps protect investment and lengthens lifecycle.
    •     
  • Fully integrated electronic engine controls provide quick response.

        
  • Optional Cat Detect with Object Detection System (rearview camera and radar) or standard Vision (rearview camera) help increase operator awareness around the machine.
    •     
  • Cab-mounted LED strobes provide warning for others near the machine.
    •     
  • Optional HID or LED lights help provide excellent workspace visibility.
    •     
  • Optional heated mirrors help ensure enhanced visibility for safe operation.

        
  • Integrated technologies allow you to monitor, manage, and enhance your jobsite operations.
    •     
  • Product Link™ remote monitoring helps provide valuable insight into machine or fleet performance through the VisionLink® interface, so you can make decisions that boost jobsite efficiency and low operating costs.
    •     
  • Vital Information Management System (VIMS™) 3G touchscreen monitor gives access to a wide range of sensor information and enhanced machine data to resolve problems before machine failure.
    •     
  • Optional Cat Detect technologies help enhance awareness of the environment around the machine for increased safety.

        
  • Steering and Transmission Integrated Control System (STIC™) combines directional selection, gear selection, and steering into a single lever, maximizing responsiveness and control, while reducing operator fatigue.
    •     
  • Operators can easily enter and exit the cab with fold-up STIC steer/ armrest, reduced access stairway angles, and standard stairway lighting.
    •     
  • Experience reduced vibrations with isolated cab mounts and seatmounted implement and steering controls.
    •     
  • Reduced interior sound levels help keep operators comfortable throughout their entire shift.

        
  • The engine is available in configurations that meet U.S. EPA Tier 4 Final and EU Stage V emission standards, or noncertified that emits equivalent to U.S. EPA Tier 3.
    •     
  • Automatic Engine Idle Shutdown helps conserve fuel when machine is not in use.
    •     
  • Generate less waste with maintenance-free batteries.
    •     
  • Maximize machine life and lower operating costs with Caterpillar Reman and Certified Rebuild programs, which utilize reused or remanufactured components for 40 to 70% cost savings.
    •     
  • Retrofit packages from Caterpillar deliver new features to older machines to get the most from your investment.

        
  • Machine features ground level or platform access to easily reach daily service points.
    •     
  • Swing-out doors on either side of the engine compartment help provide easy access to critical daily service checks.
    •     
  • Ecology drains help prevent spills and allow for easy service.
    •     
  • Intuitive design includes ground level access to transmission control valves for safe and convenient service.

Similar Models

D1 Dozer

D1 Dozer
D2 Dozer

D2 Dozer
D3 Track-Type Tractor

D3 Track-Type Tractor