New 824 Wheel Dozer For Sale in Georgia
Yancey Brands
Hotlines
824 Wheel Dozer
824 Wheel Dozer
824 Wheel Dozer
824 Wheel Dozer

Cat® wheel dozers combine the power of a track dozer with the mobility of a wheeled machine to help deliver high production at low operating costs in a variety of applications — from surface mining cleanup to coal stock piling, road maintenance to reclamation.

Get Pricing
Call 877-OWNACAT
Engine
Engine Model Cat® C15 
Net Power - SAE J1349:2011 405 hp
Rated Speed 1800 r/min
Net Power - ISO 9249:2007 405 hp
Engine Power - ISO 14396:2002 426 hp
Gross Power - SAE J1995:2014 434 hp
Peak Net Torque (1,300 rpm) 1479 lbf·ft
Torque Rise 33%
Maximum Altitude without Derating (U.S. EPA Tier 4 Final/EU Stage V) 9298 ft
Maximum Altitude without Derating (U.S. EPA Tier 3/EU Stage IIIA) 9098 ft
Bore 5.4 in
Stroke 6.7 in
Displacement 927.6 in³
High Idle Speed 2300 r/min
Low Idle Speed 800 r/min
Note (1) Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator.
Note (2) Two engine emission configurations are available. One meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emissions standards. The other meets Brazil MAR-1 emission standards, emitting equivalent to U.S. EPA Tier 3 and EU Stage IIIA.
Operating Weight – Straight Blade (Tier 4 Final/Stage V) 74966 lb
Blade Capacity Range 5.1-16.2 m3 (6.6-21.2 yd3)
Transmission Type Cat planetary - powershift - ECPC
Forward - 1 3.8 mile/h
Forward - 2 6.9 mile/h
Forward - 3 12.2 mile/h
Forward - 4 21.6 mile/h
Reverse - 1 4.3 mile/h
Reverse - 2 7.8 mile/h
Reverse - 3 13.9 mile/h
Reverse - 4 24.7 mile/h
Pump Flow at 1,800 rpm 30.9 gal/min
Main Relief Pressure 3771 psi
Maximum Supply Pressure 3495 psi
Cylinders, Double Acting - Lift, Bore and Stroke 120 mm × 1070 mm (4.7 in × 42.1 in)
Cylinder, Double Acting - Tilt and Tip, Bore and Stroke 140 mm × 230 mm (5.5 in × 9.1 in)
Steering System - Circuit Pilot operated, load sensing
Bore 4.5 in
Stroke 22.7 in
Steering System - Pump Variable displacement piston
Max Flow at 1,800 rpm 44.9 gal/min
Relief Valve Setting - Steering 3481 psi
Vehicle Articulation Angle 86°
Cooling System 30.6 gal (US)
Engine Crankcase 9 gal (US)
Transmission 17.4 gal (US)
Fuel Tank 206.6 gal (US)
Diesel Exhaust Fluid Tank (For Tier 4 Final/Stage V Only) 8.5 gal (US)
Differential - Final Drives - Front 26.4 gal (US)
Differential - Final Drives - Rear 29.1 gal (US)
Hydraulic Tank Only 35.4 gal (US)
Hydraulic System - Implement/Steering 56.5 gal (US)
Note (1) All nonroad Tier 4 Final, EU Stage V, and Japan 2014 (Tier 4 Final) diesel engines are required to use: – Ultra low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. – Cat engines are compatible with the following renewable, alternative, and biodiesel* fuels that reduce greenhouse gases***: • Up to B20 biodiesel (FAME)** • Up to 100% HVO and GTL renewable fuels – Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specifications are required. – Diesel exhaust fluid (DEF) that meets all requirements defined in ISO 22241-1:2006. * Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. ** Engines with aftertreatment devices can use up to B20. Engines with no aftertreatment devices can use higher blends, up to B100. *** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.
Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.86 metric tonnes (3.15 tons).
Front Planetary – Fixed
Rear Planetary – Oscillating
Oscillation Angle ±11°
Parking Brake Drum and shoe, spring applied, hydraulic released
Brakes Multi-disc wet (enclosed) 4 WHL
Operator Sound Pressure Level (ISO 6396:2008) 73 dB(A)
Machine Sound Power Level (ISO 6395:2008) 113 dB(A)
Operator Sound Pressure Level (ISO 6396:2008)* 72 dB(A)
Machine Sound Power Level (ISO 6395:2008)** 110 dB(A)
Note (1) * For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives”
Note (2) ** European Union Directive “2000/14/EC” as amended by “2005/88/EC.” and UK Noise Regulation 2001 No. 1701
Note (3) The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (4) The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (5) Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Operator Sound Pressure Level (ISO 6396:2008) 73 dB(A)
Machine Sound Power Level (ISO 6395:2008) 113 dB(A)
Operator Sound Pressure Level (ISO 6396:2008)* 72 dB(A)
Machine Sound Power Level (ISO 6395:2008)** 110 dB(A)
Note (1) * For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives”
Note (2) ** European Union Directive “2000/14/EC” as amended by “2005/88/EC.” and UK Noise Regulation 2001 No. 1701
Note (3) The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (4) The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (5) Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Height to Top of Beacon 14.5 ft
Height - Top of Exhaust Stack 14.2 ft
Height - Top of Hood 10.5 ft
Ground Clearance - Bumper 2.8 ft
Centerline of Rear Axle to Edge of Bumper 9.3 ft
Centerline of Front Axle to Hitch 6.1 ft
Wheel Base 12.1 ft
Length - With Blade on Ground - Straight Blade 27.6 ft
Ground Clearance to Trunnion 1.45 ft
Height - Top of Cab 13.5 ft
Width Over Guardrails 10.94 ft
Ground Clearance 1.8 ft
Capacity 6.6 yd³
Width Over End Bits 177.4 in
Height 48.4 in
Dig Depth 17.6 in
Ground Clearance 41.6 in
Maximum Tilt 45.9 in
Turning Radius – Outside Corner of Blade 23.7 ft
Turning Radius – Inside Corner of Blade 10.15 ft
Capacity 6.6 yd³
Width Over End Bits 177.4 in
Height 48.4 in
Dig Depth 17.6 in
Ground Clearance 41.6 in
Maximum Tilt 45.9 in
Turning Radius – Outside Corner of Blade 23.2 ft
Turning Radius – Inside Corner of Blade 10.2 in³
Capacity 10 yd³
Width Over End Bits 174.1 in
Height 61.1 in
Dig Depth 18.8 in
Ground Clearance 42 in
Maximum Tilt 44.1 in
Turning Radius – Outside Corner of Blade 23.8 ft
Turning Radius – Inside Corner of Blade 10.8 ft
Capacity 10 yd³
Width Over End Bits 171.3 in
Height 53.1 in
Dig Depth 18.1 in
Ground Clearance 41.4 in
Maximum Tilt 44.6 in
Turning Radius – Outside Corner of Blade 23.9 ft
Turning Radius – Inside Corner of Blade 11.3 ft
Capacity 21.2 yd³
Width Over End Bits 189 in
Height 68.7 in
Dig Depth 18.6 in
Ground Clearance 42.2 in
Maximum Tilt 48.9 in
Turning Radius – Outside Corner of Blade 24.9 ft
Turning Radius – Inside Corner of Blade 11.4 ft
Capacity 10.6 yd³
Width Over End Bits 171.6 in
Height 53.1 in
Dig Depth 18.1 in
Ground Clearance 41.4 in
Maximum Tilt 44.6 in
Turning Radius – Outside Corner of Blade 23.9 ft
Turning Radius – Inside Corner of Blade 11.4 ft
Long-Term Value And Durability

        
  • Solid through-width push beams transfer and absorb stresses through a larger portion of the frame. 
    •     
  • The full box-section rear frame helps resist torsional shock and twisting forces.
    •     
  • Heavy-duty steering cylinder mounts efficiently transmit steering loads into the frame.
    •     
  • Optimized axle mounting helps result in increased structural integrity.
    •     
  • Delayed engine shutdown allows your machine to cool before shutting down the engine to help prevent engine and after-treatment damage.
    •     
  • Resilient, durable blades are designed with excellent dozing and rolling characteristics.

        
  • The Cat C15 engine is designed for maximum fuel efficiency in the most demanding conditions.
    •     
  • Load sensing hydraulic steering system helps enable precise machine control for easier loading.
    •     
  • Experience increased efficiency with variable displacement piston pumps.
    •     
  • World-class Cat planetary powershift transmission features Single Clutch Speed Shifting (SCSS) for smooth, consistent shifting and efficiency. Enable autoshift mode to automatically upshift or downshift based on machine speed, optimizing performance and conserving fuel.
    •     
  • Equipped with Cat torque converter (TC) with lock-up clutch which helps optimize fuel efficiency by eliminating TC losses while transferring more power to the ground. 

        
  • Standard rear vision camera to help enhance operator visibility and improve workspace safety.
    •     
  • Battery disconnect, emergency engine shutdown, and stairway light switch are accessed through the ground level power service center.
    •     
  • Cab-mounted LED beacon helps provide warning for others near the machine.

        
  • Integrated technologies help you to monitor, manage, and enhance your jobsite operations.
    •     
  • Product Link™ remote monitoring helps provide valuable insight into machine or fleet performance through the VisionLink® interface, so you can make decisions that boost jobsite efficiency and lower operating costs.
    •     
  • Vital Information Management System (VIMS™) touchscreen display helps give access to a wide range of sensor information and enhanced machine data to help resolve problems before machine failure.
    •     
  • Optional Cat Detect technologies help enhance awareness of the environment around the machine for increased safety.

        
  • Steering and Transmission Integrated Control (STIC™) system combines directional selection, gear selection, and steering into a single lever, helping to maximize 
        responsiveness and control, while reducing operator fatigue.
    •     
  • Operators can easily enter and exit the cab with fold-up STIC steer/armrest, reduced access stairway angles, and standard stairway lighting.
    •     
  • Experience reduced vibrations with isolated cab mounts and seat-mounted implement and steering controls.
    •     
  • Large backlit membrane switches feature LED activation indicators and ISO symbols for quick function identification.
    •     
  • Reduced interior sound levels help keep operators comfortable throughout their entire shift.

        
  • Automatic engine and electrical system shutdown helps conserve fuel and helps reduce component wear when machine is not in use.
    •     
  • Generate less waste with maintenance-free batteries.
    •     
  • Maximize machine life and help lower operating costs with Caterpillar Reman and Certified Rebuild programs, which utilize reused or remanufactured components for 40 to 70% cost savings.
    •     
  • Retrofit packages from Caterpillar deliver new features to older machines to get the most from your investment.

        
  • Swing-out fuel, hydraulic oil coolers, and condenser help allow for easy access cleanout.
    •     
  • Machine features ground level or platform access to easily reach daily service points.
    •     
  • Swing-out doors on either side of the engine compartment help provide easy access to critical daily service checks.
    •     
  • Optional tire pressure monitoring system provides real-time information to the operator in the cab for optimized tire life.
    •     
  • Electronics bay is conveniently located inside the cab.
    •     
  • Sight gauges offer quick visual inspection to help minimize fluid contamination.
    •     
  • Lighting inside the engine compartment helps improve visibility to service points.
    •     
  • Ecology drains help prevent spills and allow for easier service.

Similar Models

D1 Dozer

D1 Dozer
D2 Dozer

D2 Dozer
D3 Track-Type Tractor

D3 Track-Type Tractor